Set-Based Configuration - Nortel 1000 Features And Services Fundamentals

182 Call Forward, Remote (Attendant and Network Wide)
7.
Set-based configuration
LD 15 - Set the Station Control Password Length.
Prompt Response
REQ: CHG
TYPE: FFC
CUST
0-99
0-31
0-8
- SCPL
- FFCS YES
1-3
- - STRL
- - STRG (#) xxx
LD 15 - Configure a Special Prefix Number (SPRE) for the customer.
Prompt Response
REQ: CHG
TYPE: FTR
CUST
0-99
0-31
xxx
- SPRE
LD 57 - Define Remote Call Forward FFCs and set FFCT.
Prompt Response
REQ CHG
TYPE FFC
xx
CUST
FFCT (NO) YES
CODE RCFA
xx
RCFA
Copyright © 1994–2008, Nortel Networks
.
Configure the attendant console RFW key.
"LD 15 - Configure the Attendant RCFW password." (page 184)
Configure the Attendant RCFW password.
Description
Change existing data.
Flexible Feature Code
Customer number
Range for Large System and CS 1000E system.
Range for Small System and Media Gateway 1000B.
Station Control Password Length (must be consistent network
wide).
Change end of dialing digits in FFC.
Number of digits to indicate FFC end of feature activation.
One to three digits to indicate FFC end of a feature activation.
Description
Change existing data.
Features and options
Customer number
Range for Large System and CS 1000E system.
Range for Small System and Media Gateway 1000B.
Special Prefix Number.
Description
Change existing data.
Flexible Feature Codes.
Customer number, as defined in LD 15
Confirmation tone is (is not) to be given after an FFC.
Remote Call Forward Activate.
xx = RCFA code.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008