Using Call Features - Nortel 1000 Features And Services Fundamentals

590 Context-sensitive soft keys
Call state
Reorder
Established (Active)
Call

Using call features

Table 15
Examples of IP Phone screens in different call states
Feature
Call Forward
Call Forward Number
Edit
Cancel Call Forward
Busy
Ring Again
Activate—screen 1
Copyright © 1994–2008, Nortel Networks
.
Action
If an invalid number is dialed, the
reorder state screen appears.
After a call is established there are
two layers of soft keys available.
Press the More key to toggle
between these layers.
Note: Some soft keys such as the SpcUsr key are not configured by
default. The System Administrator will configure as needed.
Action
Press the Forward key from the
default idle state.
Enter the forward number.
Press the >Forwar soft key from
the idle screen state.
A busy tone is received.
Press RingAgn.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Display
Release and try again
Layer 1:
Conf Trans Park More...
Layer 2:
PrivRls Charge CParty
More...
Display
Enter Forward Number appears
on the display line.
CFWD
Press CFWD or Enter new #
The arrow continues to flash until
you press the >Forwar soft key.
The telephone is returned to the
default idle state of
>Forwar Callers Redial
with an arrow beside >Forwar
After pressing CFW the user has
40 seconds to complete the CFW
otherwise it will timeout.
Call Forward cancelled
Destination Busy
Activate RING AGAIN?
Note: The Ring Again feature times
out if the feature is not activated.
The telephone returns to the idle
state.
>RingAg Forward Callers
Redial