Cis Ani Digits Manipulation Feature - Nortel 1000 Features And Services Fundamentals

458 CIS ANI Digits Manipulation and Gateways Enhancements
•
•
•
•
•
Feature implementation

CIS ANI Digits Manipulation feature

This section contains the overlay procedures required to configure the
CIS ANI Digits Manipulation feature. The
feature implementation" (page 466)
Enhancements feature implementation" (page
Task summary list
The following is a summary of the tasks in this section:
1.
2.
3.
4.
5.
6.
7.
8.
Copyright © 1994–2008, Nortel Networks
.
Flexible Numbering Plan (FNP) package 160
Flexible Tones and Cadences (FTC) package 125
Trunk Fail Monitor (TFM) package 182
IPE package (XPE) package 203 (required for outgoing X3W packs)
Fast Tone and Digit Switch (FAST_TDS) package 87 (required for
outgoing E3W package)
"LD 15 - Configure ANI Table for telephones" (page 459)
Configure ANI Table for telephones.
"LD 16 - Create or modify outgoing CIS route data block." (page 460)
Create or modify outgoing CIS route data block.
"LD 10 - Define ANI entry for analog (500/2500) sets." (page 462)
Define ANI entry for analog (500/2500) sets.
"LD 10 - Configure the CAC for CIS and MFC signaling for analog
500/2500 sets." (page 463)
Configure the CAC for CIS and MFC signaling for analog 500/2500 sets.
"LD 11 - Configure ANI entry for Meridian 1 proprietary sets." (page 463)
Configure ANI entry for Meridian 1 proprietary sets.
"LD 11 - Configure the CAC for CIS and MFC signaling for digital sets."
(page 464)
Configure the CAC for CIS and MFC signaling for digital sets.
"LD 27 - Configure ANI entry for Basic Rate Interface (BRI) lines." (page
465)
Configure ANI entry for Basic Rate Interface (BRI) lines.
"LD 27 - Configure the CAC for CIS and MFC signaling for BRI sets."
(page 466)
Configure the CAC for CIS and MFC signaling for BRI sets.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
"CIS Gateways Enhancements
section begins on "CIS Gateways
466).