Nortel 1000 Features And Services Fundamentals page 473

CIS ANI Reception
Contents
This section contains information on the following topics:
"Feature description" (page 473)
"Operating parameters" (page 480)
"Feature interactions" (page 480)
"Feature packaging" (page 480)
"Feature implementation" (page 481)
"Feature operation" (page 485)
Feature description
The Commonwealth of Independent States (CIS) Automatic Number
Identification (ANI) Reception feature allows the system to receive the
Automatic Number Information from the CIS Central Office (CO) calling
party on incoming local calls. The CIS Public Telephone Network does not
provide ANI information on the incoming toll calls.
The CIS ANI Reception feature works on the CIS Digital Trunk Interface
(DTI) feature. It requires CIS DTI2 card, vintage NTCG01AC (Large
Systems) or NTCG02AC (Small Systems).
The ANI digits received from the CIS CO are used by the system as the
R2MFC Calling Number Identification (CNI) digits. A list of uses for the
ANI digits is found on
display of the proprietary set or on the attendant console display.
ANI Reception is performed in one of two ways:
•
•
Copyright © 1994–2008, Nortel Networks
.
page
ANI request is issued automatically by the incoming local CIS DTI2
trunk during the call setup.
ANI request is issued by the incoming local CIS DTI2 trunk upon a
manually solicited request from the proprietary set with display or from
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
1104. The ANI digits are also displayed on the
473