Configure Subscriber Access, Auto Attendant, And Mwi Dn Information - Nortel 1000 Fundamentals

40 Configuration of Communications Server 1000 with Microsoft Exchange Server 2007 Unified
Messaging
Configure Subscriber Access, Auto Attendant, and MWI DN information
Opening the Microsoft Unified Messaging tab of the Edit page for
Nodes: Servers, Media Cards allows the Subscriber Access, Auto
Attendant, and MWI DN information to be configured. These configuration
parameters, once expanded, appear as shown in the following image:
Figure 9
Subscriber Access, Auto Attendant, MWI DN and Voice mail softkeys
configuration parameters
The acceptable data entries for the Subscriber Access, Auto Attendant,
and MWI DN information fields are as follows:
•
•
•
Communication Server 1000 with Microsoft Exchange Server 2007 Unified Messaging Fundamentals
Copyright © 2008 Nortel Networks
.
Subscriber Access Number: This is a numeric field for up to 32 digits.
Auto Attendant Number: This is a numeric field for up to 32 digits.
MWI Application DN: This is a numeric field for up to 32 digits.
Nortel Communication Server 1000
NN43001-122 02.04
24 October 2008