Resource Class Settings; Resource Class Area; Resource Class Setting Guidelines; Resource Class Default Settings - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

TABLE 24
Area

Resource class settings

The Resource class monitors flash memory. It calculates the amount of flash space consumed and
compares it to a defined threshold.

Resource class area

Table 25
sysMonitor command.
TABLE 25
Area
Flash

Resource class setting guidelines

Use the Resource Class default settings listed in

Resource class default settings

Table 26
TABLE 26
Flash
Fabric Watch Administrator's Guide
53-1002752-01
Environment class default settings (Continued)
Description
describes the Fabric Watch Resource class area. Configure the Resource class using the
Resource class area
Description
Monitors the compact flash space available by calculating the percentage of flash space
consumed and comparing it with the configured high threshold value.
provides default settings for areas in the Resource class.
Resource class default settings
Monitors the
percentage of
compact flash used
Resource class settings
Default threshold Default alarm settings
settings
Brocade 8000
Low: 0
High: 73
Buffer: 10
Brocade DCX
Low: 0
High: 70
Buffer: 10
Brocade DCX-4S Below: 3
Low: 0 Above: 3
High: 75
Buffer: 10
Table 26.
Unit: Percentage (%) Below: 3
Time base: none Above: 3
Low: 0
High: 90
Buffer: 0
8
Threshold state
Informative
Out-of-range
Informative
Informative
Out_of_range
In_range
77