Table 33 Port Detail Report Columns - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

10
Port Detail report
NOTE
Output of the Port Detail report depends on the ports that belong to the current Admin Domain
context. If a port does not belong to the current Admin Domain, nothing other than the port number
is displayed for that port.
Example:
"000
Table 33
TABLE 33
Report item
LFA
LSY
LSI
PER
INW
CRC
PSC
BLP
STM
SRX
STX
SCU
SVO
102
219 VE HEALTHY
220 VE HEALTHY
221 VE HEALTHY
222 VE HEALTHY
223 VE HEALTHY
----------------Not a member of current Admin Domain-------------------"
lists and describes each item in the Port Detail report.
Port Detail report columns
Description
Link Loss: the number of link loss occurrences out of range for a specified time period.
Sync Loss: the number of sync loss occurrences out of range for a specified time period.
Signal Loss: the number of signal loss occurrences out of range for a specified time period.
Protocol Error: the number of protocol errors out of range for a specified time period.
Invalid word. The number of invalid words out of range for a specified time period.
Invalid CRC: the number of CRC errors out of range for a specified time period.
Port hardware state changed too often because of fabric reconfiguration.
Buffer limited port: the switch status changes when a port is in a buffer limited mode based
on the switch status policy.
SFP temperature is out of specifications.
SFP receive power is out of specifications.
SFP transmit power is out of specifications.
SFP current is out of specifications.
SFP voltage is out of specifications.
003:37 - - - -
002:48 - - - -
061:19 - - - -
061:19 - - - -
061:19 - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - -
Fabric Watch Administrator's Guide
- - -
- - -
- - -
- - -
- - -
53-1002752-01