Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 87

TABLE 18
Area
State changes (ST)
Transmitted packets
(TXP)
Trunk utilization
(E_Port, FCU_Port,
and FOP_Port)
Link reset
Fabric Watch Administrator's Guide
53-1002752-01
FOP_Port and FCU_Port class default settings (Continued)
Description
Monitors state
changes.
Monitors the
transmit rate, by
percentage.
The percent of
utilization for the
trunk at the time of
the last poll.
Monitors the
number of link
resets sent by a
given port (LR-Out)
and received on a
given port (LR-In).
portThConfig command procedures
Default threshold Default alarm settings
settings
Unit: Changes Below: 0
Time Base: minute Above: 0
Low: 0
High: 50
Buffer: 0
Unit: Percentage (%) Below: 0
Time Base: minute Above: 0
Low: 0
High: 100
Buffer: 0
Unit: Percentage (%) Below: 0
Time Base: minute Above: 0
Low: 0
High: 100
Buffer: 0
Unit: Errors Below: 0
Time Base: minute Above: 0
Low: 0
High: 500
Buffer: 50
7
Threshold state
Informative
Out_of_range
Informative
Informative
Informative
Informative
Informative
Out_of_range
67