Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 50

5
Fabric Watch configuration tasks
TABLE 2
Configuration task
Set the following parameters for port
monitoring:
•
•
•
•
•
•
•
•
Set the port persistence time
Configure port fencing
Set the following parameters for system
monitoring:
•
•
•
•
•
•
Set and display the switch status policy
parameters.
Show the overall switch status.
Configure FRU state and notifications, and
monitor power supply, fan, and SFP FRUs.
Display fan status
Show sensor readings
Show switch temperature readings
Create a detailed port report.
Show the availability of monitor
information.
30
Fabric Watch configuration tasks (Continued)
Port type
Area type
Time base
Threshold level
Trigger (boundary level)
Action (notification type)
Buffer
Port fencing
Class
Area type
Threshold level
Trigger (boundary level)
Action (notification type)
Buffer
Command
portThConfig
portFencing
fwSet --port -persistence
portFencing
sysMonitor
switchStatusPolicySet
switchStatusPolicyShow
switchStatusShow
fwFruCfg
fanShow
sensorShow
tempShow
fwPortDetailShow
fwSamShow
Location of procedure
"Port Monitoring" on page 55
"Setting the port persistence time"
page 69
"Port fencing" on page 69
"System monitoring using the
sysMonitor command" on page 78.
"System Monitoring" on page 75
Chapter 8, "System Monitoring"
Chapter 8, "System Monitoring".
Chapter 8, "System Monitoring"
Chapter 8, "System Monitoring"
Chapter 8, "System Monitoring"
"Generating a Port Detail report"
page 101.
"Switch Availability Monitor report"
page 98.
Fabric Watch Administrator's Guide
53-1002752-01
on
on
on