System Monitoring; In This Chapter; Environment Monitoring; Environment Class Area - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

System Monitoring

In this chapter

Environment monitoring

The Environment class provides information about the internal temperature of the switch. You can
configure the Environment class using the sysMonitor command.

Environment class area

Table 23
TABLE 23
Area
Temperature
NOTE
Event Manager (EM) now manages fan monitoring; the switch status is calculated based on fan
status reported by EM. You can use the fanShow command to view the fan status.
Fabric Watch Administrator's Guide
53-1002752-01
•
Environment monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
•
Resource class settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
•
System monitoring using the sysMonitor command . . . . . . . . . . . . . . . . . . . 78
•
Recommended environment and resource monitoring settings . . . . . . . . . 81
•
Switch monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
•
FRU monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
lists and describes the Temperature area in the Environment class.
Environment class area
Description
Refers to the ambient temperature inside the switch, in degrees Celsius. Temperature sensors
monitor the switch in case the temperature rises to levels at which damage to the switch might
occur.
Chapter
8
75