Configuring the system memory usage monitoring threshold
Enter the sysMonitor command using the following parameters:
switch:admin> sysmonitor
raslog -high_limit 80
Recommended environment and resource monitoring settings
Table 27
TABLE 27
Recommended Environment and Resource class settings
Environment
Temperature X
Resource
Flash
Switch monitoring
Before entering the switchStatusPolicySet command, plan your switch status policy. Determine
your system requirements and the factors that affect its monitors.
NOTE
Based on the configuration of the core blade component of the switch status policy, Fabric Watch
generates two RASlogs when a core blade is removed either on the Brocade DCX or the Brocade
DCX-4S. For example, if the Down and Marginal configuration is 0 and 1 on the DCX, upon removal
of the first core blade, Fabric Watch generates one RASlog for the switch status policy and the other
RASlog for the error itself.
Fabric Watch Administrator's Guide
53-1002752-01
Recommended environment and resource monitoring settings
--
config mem -poll 10 -retry 1 -limit 20 -action snmp,
lists the recommended settings for Environment and Resource classes.
Trait Configuration
C
None
X
Percentage
None
0
Depends
10
on switch
type
0
90
0
8
E=Error_Log, S=SNMP_Trap,
P=Port_LOG_LOCK,
M=EMAIL_ALERT, PF=Port Fence
X
E,S
E,S
X
E,S
E,S
81