Recommended Port Configuration Settings - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual
Brocade fabric watch administrator's guide v7.1.0 (53-1002752-01, march 2013)
Hide thumbs
Also See for StoreFabric SN6500B:
- User manual (1505 pages) ,
- Command reference manual (1168 pages) ,
- Reference (934 pages)
Table of Contents
Advertisement
7
Recommended port configuration settings
Port fencing requirements
To configure port fencing using the DCFM management application, all Fabric OS devices must
have Fabric Watch and must be running firmware Fabric OS 6.2 or later.
Port fencing threshold areas supported on BNA
You can add, edit, view, or remove thresholds on the following area types using Brocade Network
Advisor (BNA). You can then assign the thresholds to available objects in the BNA tree.
Port fencing threshold areas include the following:
•
•
•
•
•
•
•
Refer to Chapter 5, "Device Configuration," of the Brocade Network Advisor User Manual for
detailed instructions on how to add, edit, view, and remove thresholds.
Recommended port configuration settings
Table 22
the host device and the storage device.
72
C3 Discard Frames (Fabric OS only)
Invalid CRCs (Fabric OS only)
Invalid Transmission Words (Fabric OS only)
Link Reset (Fabric OS only)
Protocol Errors (M-EOS and Fabric OS)
Security (M-EOS)
State Changes (Fabric OS only)
lists the recommended settings for physical port, E_Port, FOP_Port, and FCU_Port for both
Fabric Watch Administrator's Guide
53-1002752-01
Advertisement
Table of Contents
