Brocade Communications Systems StoreFabric SN6500B Administrator's Manual page 115

To enable an e-mail alerts recipient, perform the following steps.
1. Open the Fabric Watch window.
2. Select the Email Configuration tab.
3. Select a FRU class in the Fabric Watch Explorer tree.
4. Click Enable.
5. Enter the e-mail address of the recipients in the Recipient Email Address field.
6. Click Apply.
7.
8. Optional: Click Send Test Email to receive a test e-mail so you can verify the e-mail notification
Disabling the e-mail alert
When you disable e-mail alerts, Fabric Watch does not send e-mail notification, even if the e-mail
notification method is assigned to monitored areas.
To disable an e-mail alerts recipient, perform the following steps.
1. Open the Fabric Watch window.
2. Select the Email Configuration tab.
3. Select a FRU class in the Fabric Watch Explorer tree.
4. Click Disable.
5. Optional: Enter the word "NONE" in the Recipient Email Address field.
6. Click Apply.
7.
Fabric Watch Administrator's Guide
53-1002752-01
Separate the e-mail addresses with commas.
Repeat steps 3 through 6 for any additional FRU classes.
is working correctly. You can send a test e-mail only after you have applied your settings.
You can disable the e-mail notification without removing the e-mail addresses.
Repeat steps 3 through 6 for any additional FRU classes.
Fabric Watch Configuration Using Web Tools
9
95