8
Resource class settings
Resource class settings
The Resource class monitors flash memory. It calculates the amount of flash space consumed and
compares it to a defined threshold.
Resource class area
Table 24
sysMonitor command.
TABLE 24
Area
Flash
Resource class setting guidelines
Use the Resource Class default settings listed in
Resource class default settings
Table 25
TABLE 25
Area
Flash
84
describes the Product Name Resource class area. Configure the Resource class using the
Resource class area
Description
Monitors the compact flash space available by calculating the percentage of flash space
consumed and comparing it with the configured high threshold value.
provides default settings for areas in the Resource class.
Resource class default settings
Description
Monitors the
percentage of
compact flash used
Table
25.
Default threshold settings
Default alarm settings Threshold state
Unit: Percentage (%)
Changed: 0
Time base: none
Below: 3
Low: 0
Above: 3
High: 90
In-Between: 1
Buffer: 0
Informative
Informative
Out_of_range
In_range
Fabric Watch Administrator's Guide
53-1001770-01