Audit Log Transfer Window - HP StorageWorks P9000 - Disk Arrays Reference Manual

Audit Log Transfer window

Use the Audit Log Transfer window to configure FTP servers and manually transfer the Audit Log
file to the FTP servers.
Table 50 Audit Log Transfer Window
Item
Output to Primary
Server
Primary Server
Setting
Primary Server Login
User
Primary Server
Output Folder
Transfer to Primary
Server
Output to Secondary
Server
Secondary Server
Setting
Secondary Server
Login User
Description
Specify whether to transfer the audit log file to the primary FTP server.
Enable: Transfers the file.
Disable: Does not transfer the file.
Set an IP address for the primary FTP server. Once you set Output to Primary Server to Enable,
IP becomes available. The default IP address has been entered, so change it as needed.
You can set either IPv4 address or IPv6 address for IP address. However, only IPv4 address is
available when the operating system of your SVP is Windows XP.
To set an IPv4 address, select IPv4. For IP, enter four integers in the range of 0 to 255 (for
example, nnn.nnn.nnn.nnn, where n is a number). Only enter numbers. Do not enter the
intervening periods.
To set an IPv6 address, select IPv6. For IP, enter eight hexadecimal numbers in the range of
0 to FFFF (for example, hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh:hhhh, where h is
a hexadecimal digit). Only enter hexadecimal numbers. Do not enter the intervening colons.
Set the UserID and Password to log in to the primary FTP server. Enter up to 256 alphanumeric
characters and symbols (ASCII codes) for user ID and password.
Set the folder location to save the audit log file. The folder location should be relative to a home
directory of a FTP server user. The default setting (/) is the home directory. Enter up to 256
alphanumeric characters and symbols (ASCII codes) for the output folder.
When you click Transfer, the audit log file is transferred to the primary FTP server according to
the settings selected on the Audit Log Transfer window. You can transfer the current audit log
file without waiting for the audit log file to reach the threshold size for automatic transfer.
Specify whether to transfer the audit log file to the secondary FTP server.
Enable: Transfers the file.
Disable: Does not transfer the file.
Set an IP address for the secondary FTP server. Once you set Output to Secondary Server to
Enable, IP becomes available. The default IP address has been entered, so change it as needed.
The restriction for the available values is the same as that of Primary Server Setting.
Set the User ID and Password to log in to the secondary FTP server. The restriction for the
available values is the same as that of Primary Server Login User.
Audit Log Transfer window 217