[Cnt Ac-S] Pairresync - HP StorageWorks P9000 - Disk Arrays Reference Manual

Copy Pace,Priority,Diff,Result}=
[{1A-0x00-0x000,GR-0xFE-0x3FF,99999,0x00,Default,4,Sync,Entire,
Never,15,032,Auto,Normal end},(snip)
-(snip)],Num. of Pairs=xx
Detailed Information
Item
P-VOL(Port-G-ID-LUN)
S-VOL(Port-G-ID-LUN)
S/N
LDKC
ID
Controller ID
Type
Initial Copy
Fence Level
Copy Pace
Priority
Diff
Result
Num. of Pairs

[Cnt Ac-S] Pairresync

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S],Pairresync,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),
Fence Level,Copy Pace,Priority,Result}=
[{1A-0x00-0x000,1B-0x00-0x000,Never,15,256,Normal end},
{1A-0x00-0x001,1B-0x00-0x001,Never,15,256,Normal end},(snip)
-(snip)],Num. of Pairs=xx
150 Audit log examples
Description
The port number, host group number, and LUN of the volume specified to the primary
volume when the pair is created sequentially.
The port number, host group number, and LUN of the volume specified to the secondary
volume when the pair is created sequentially.
The serial number of the device.
The LDKC number of the paired LDKC.
The path group ID or SSID.
When the path group ID is default setting, the output is "Default."
The controller ID.
The update copy mode set.
Sync: Synchronous mode
The initial copy mode set.
Entire: Copy all, None: Do not copy
The fence level set (the condition that MCU rejects the write operation to the primary
volume).
Never: No condition, Data: S-VOL data, Status: S-VOL status
The initial copy speed set (the number of tracks you can copy at one time).
The priority of the set initial copy operation (scheduling order).
The unit of the differential management set.
Auto, Cylinder, Track
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of created pairs.