[Prov] Set Commanddevsec; [Provl] Set Devgrpdef - HP StorageWorks P9000 - Disk Arrays Reference Manual

+{LDKC:CU:LDEV,CommandDev}
=[{0x00:0xXX:0xXX,Disable},{0x00:0xXX:0xXX,Enable}],
Num. of LDEVs=2
Detailed Information
Item
LDKC:CU:LDEV
CommandDev
Num. of LDEVs

[PROV] Set CommandDevSec

This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set CommandDevSec,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,CommandDevSec}
=[{0x00:0xXX:0xXX,Disable},
{0x00:0xXX:0xXX,Enable}],Num. of LDEVs=2
Detailed Information
Item
LDKC:CU:LDEV
CommandDevSec
Num. of LDEVs

[PROVl] Set DevGrpDef

This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx, YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Set DevGrpDef,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{LDKC:CU:LDEV,DevGrpDef}=[{0xXX:0xXX:0xXX,Enable}],
Num. of LDEVs=1
Detailed Information
Item
LDKC:CU:LDEV
UserAuth
Num. of LDEVs
126 Audit log examples
Description
The LDKC, CU, and LDEV numbers of the logical volume where the command device is set.
Indicates whether the command device setting is enabled or disabled.
Disable or Enable will appear.
The number of logical volumes where the command device is set.
Description
The LDKC, CU, and LDEV numbers of the logical volume where the command device is set.
Indicates whether the command device security setting is enabled or disabled.
Disable or Enable will appear.
The number of logical volumes where the command device is set.
Description
The LDKC, CU, and LDEV numbers of the volume where the device group definition is specified.
Indicates whether the device group definition is enabled or disabled.
Disable or Enable will appear.
The number of logical volumes where the device group definition is set.