[Install] Install Cv - HP StorageWorks P9000 - Disk Arrays Reference Manual

Item
M-SVP
IPv4(IPAddress,Subnet Mask)
IPv6(IPAddress, Subnet
Prefix length)
S-SVP
IPv4(IPAddress,Subnet Mask)
IPv6(IPAddress, Subnet
Prefix length)

[Install] Install CV

This logged information indicates that the formatting was only requested but not finished. If the
operation does not require the formatting, this logged information indicates that the volume was
created.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Install CV,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{PG,LDKC:CU:LDEV,Slot,Emulation,Size,Unit,System Disk,SSID,MPB}
=[{1-1,0x00:0x00:0x00,-,OPEN-V,10000,LBA,Disable,
0x0005,Auto}],Num. of LDEVs=1
Basic Information
Parameter
Non Format
Progress Close
Quick Format
Quick Format Close
Note: No parameter is output for any case other than those described in this table.
Detailed Information
Item
PG
LDKC:CU:LDEV
Slot
Emulation
Size
Unit
System Disk
SSID
MPB
Num. of LDEVs
68 Audit log examples
Description
Master SVP details are provided in the format described below.
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
Standby SVP details are provided in the format described below.
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
Description
Unformatted Install CV.
The progress window of LDEV format is closed.
Quick Format is selected.
The progress window of preparing for Quick Format is closed.
Description
The parity group number.
The LDKC, CU, and LDEV numbers.
The slot number.
The emulation type.
The CV capacity.
The CV unit capacity.
The setting status of system disk.Disable or Enable will appear.
The subsystem ID.
The ownership of the MPB.
The number of LDEVs.