[Install] Add Wwn; [Install] All Config; [Install] Assist Config - HP StorageWorks P9000 - Disk Arrays Reference Manual

Hp storageworks p9000 audit log user and reference guide (av400-96333, january 2011)
Hide thumbs Also See for StorageWorks P9000 - Disk Arrays:
Table of Contents

Advertisement

Detailed Information
Item
Port
HostGrpID
LUN
LDKC:CU:LDEV
Num. of Paths

[Install] Add WWN

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Add WWN,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,WWN,Nickname}
=[{XX,0xXXX,0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX},
{XX,0xXXX,0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}],
Num. of WWNs=2
Detailed Information
Item
Port
HostGrpID
WWN
Nickname
Num. of WWNs

[Install] All Config

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],All Config,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{New Ver.,Old Ver.}={xx-xx-xx/xx,xx-xx-xx/xx}
Detailed Information
Item
New Ver.
Old Ver.

[Install] Assist Config

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Assist Config,,Normal end,
Description
The name of the port where the host group is created.
The host group number linked to the logical volume.
Indicates LUN of the logical volume linked to the host group.
The LDKC, CU, and LDEV numbers of the logical volume linked to the host group.
The number of LU paths set.
Description
The name of the port where the host group was created.
The host group number where the host was registered.
Indicates WWN of the host bus adapter for the host registered in the host group. WWN is a
16-digit number in the hexadecimal format.
The nickname of the host bus adapter for the host registered in the host group.
The number of WWNs of the host registered in the host group.
Description
The new version number.
The old version number.
Install Descriptions
57

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the StorageWorks P9000 - Disk Arrays and is the answer not in the manual?

Table of Contents