[Install] Set Security Switch - HP StorageWorks P9000 - Disk Arrays Reference Manual

={((555.666.777.888),(255.255.255.255)),
((9999:AAAA:BBBB:CCCC:DDDD:EEEE:FFFF:0000),(64))}
Basic Information
Parameter
SVP
SVP&DKC
Detailed Information
Item
IPAddress
Subnet Mask
Use Duplex
SVP Kind
IPv4
IPv6
M-SVP
IPv4(IPAddress,Subnet Mask)
IPv6(IPAddress,Subnet Prefix
length)
S-SVP
IPv4(IPAddress,Subnet Mask)
IPv6(IPAddress,Subnet Prefix
length)

[Install] Set Security Switch

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Security Switch,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Switch}=[{XX,Disable},{XX,Enable}],Num. of Ports=2
Detailed Information
Item
Port
Switch
Num. of Ports
80 Audit log examples
Description
Change of the IP address for SVP
Change of the IP address for SVP and DKC
Description
The IP address in SVP.
The subnet mask in SVP.
Indicates whether the Duplex setting in SVP is valid or invalid.
Valid: Valid, Invalid: Invalid
The kind of duplicated SVP.
Master SVP: Master SVP, Standby SVP: Standby SVP.
The status of IPv4.
Valid: enabled, Invalid: disabled.
The status of IPv6.
Valid: enabled, Invalid: disabled.
Master SVP details are provided in the format described below.
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
Standby SVP details are provided in the format described below.
IPv4 (IPAddress: IP address, Subnet Mask: Subnet mask)
IPv6 (IPAddress: IP address, Subnet Prefix length: The value of subnet prefix)
Description
The name of the port where the LUN security setting is changed.
Indicates whether the LUN security setting is enabled or disabled.
Disable or Enable will appear.
The number of ports where the LUN security setting is changed.