Detailed Information
Item
Install
Manager
Num. of Managers
Community
Trap
Num. of Traps
Num. of Communities
System Group
Name
Contact
Location
Spreadsheet Descriptions
[Spreadsheet] CflSet End
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Spreadsheet],CflSet End,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
[Spreadsheet] CflSet Start
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Spreadsheet],CflSet Start,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Input,Output}={C:\Set_IN.spd,C:\Set_OUT.spd}
Detailed Information
Parameter
Input
Output
[Spreadsheet] LUNM Operation
The Configuration File Loader log appears in the log file line. It is located between the line that
contains "Start" and the line contains "End."
Description
The setting status of SNMP Agent.
Enable, Disable
The IP address of the registered SNMP manager. The IP address divided by periods (.) is an
Ipv4 address, and the IP address divided by colons (:) is an Ipv6 address.
The number of the registered SNMP managers.
The registered community name.
The IP address where the trap of community is reported. The IP address divided by periods (.)
is an Ipv4 address, and the IP address divided by colons (:) is an Ipv6 address.
The number of traps reported.
The number of registered communities.
The setting of system group information (Name, Contact, and Location).
The nickname of the device set.
The setting name of the system administrator.
The setting location of the device set.
Description
Indicates name of the input file.
Indicates name of the output file.
Spreadsheet Descriptions
147