Table 15 Addresses of Fibre Channel Port (continued)
Value
Address
30
B5 (29)
31
B4 (30)
32
B3 (31)
* Addresses outside parentheses indicate arbitrated-loop physical address (AL-PA). Addresses in parentheses indicate
loop IDs.
[PROV] Edit Ports(Attr)
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Ports(Attr),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+Attribute=RCU Target
++Port=[1E],Num. of Ports=1
Detailed Information
Item
Attribute
Port
Num. of Ports
[PROV] Edit Ports(Security)
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Ports(Security),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Switch}=[{XX,Disable},{XX,Enable}],Num. of Ports=2
Detailed Information
Item
Port
Switch
Num. of Ports
[PROV] Edit Ports(Speed)
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[PROV],Edit Ports(Speed),,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
1 16
Audit log examples
*
Value
Address
62
75 (61)
63
74 (62)
64
73 (63)
Description
The attribute of the port after change.
Target: Target port, Initiator: Initiator port, RCU Target: RCU Target port, External: External
port
The name of the port where the setting is changed.
The number of ports where the setting is changed.
Description
The name of the port where the LUN security setting is changed.
Indicates whether the LUN security setting is enabled or disabled.
Disable or Enable is output.
The number of ports where the LUN security setting is changed.
*
Value
Address
94
45 (93)
95
43 (94)
96
3C (95)
*
Value
Address
126
01 (125)
-
-
-
-
*