[Cnt Ac-S] Pairsplit-S; Continuous Access Synchronous Z Descriptions; [Cnt Ac-S Z] Add Pair - HP StorageWorks P9000 - Disk Arrays Reference Manual

Item
Result
Num. of Pairs

[Cnt Ac-S] Pairsplit-S

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S],Pairsplit-S,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),Type,Force,Result}
=[{1A-0x00-0x000,1B-0x00-0x000,P-VOL,No,Normal end},
{1A-0x00-0x001,1B-0x00-0x001,P-VOL,No,Normal end},
+{1A-0x00-0x002,1B-0x00-0x002,P-VOL,No,Normal end},(snip)
-(snip)],Num. of Pairs=xx
Detailed Information
Item
P-VOL(Port-G-ID-LUN)
S-VOL(Port-G-ID-LUN)
Type
Force
Result
Num. of Pairs

Continuous Access Synchronous Z Descriptions

[Cnt Ac-S Z] Add Pair

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx,, 00:00,RMI AP,uid=user-name,1,,
[Cnt Ac-S Z],Add Pair,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{M-VOL(LDKC:CU:LDEV),R-VOL(LDEV),S/N,LDKC,SSID,
Controller ID,Type,Initial Copy,Fence Level,
Copy Pace,Priority,Diff,CFW,DFW,TS,Result}
=[{0x00:0x00:0x00,0xFF,99999,0x00,0x0004,4,Sync,Entire,Never,15,
032,Auto,Only M-VOL,Required,Enable,Normal end},(snip)
-(snip)],Num. of Pairs=xx
152 Audit log examples
Description
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of split pairs.
Description
The port number, host group number, and LUN of the primary volume in the deleted pair
sequentially.
The port number, host group number, and LUN of the secondary volume in the deleted
pair sequentially.
The volume type of the volume on the primary site.
P-VOL: Primary volume, S-VOL: Secondary volume
The setting for forced pair deletion.
Yes: Pair is deleted even when MCU cannot communicate with RCUNo: Pair is deleted
when MCU can change the pair status to SMPL only
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of deleted pairs.