[Prov] Delete Host Group - HP StorageWorks P9000 - Disk Arrays Reference Manual

++{LDKC:CU:LDEV,LDEV Result}=[{0x00:0x00:0x00,Normal end},
{0x00:0x00:0x01,Normal end},{0x00:0x00:0x02,Normal end}],
Num. of LDEVs = 3
Detailed Information
Item
Pool ID
Pool Type
Multi Tier Pool
Warning Threshold(%)
Depletion
Threshold(%)
Subscription Limit(%)
Tier Management
Cycle Time
Monitoring Period
Pool Result
Num. of Pools
LDKC:CU:LDEV
LDEV Result
Num. of LDEVs

[PROV] Delete Host Group

This log is output when LUN Manager operation is performed using Configuration File Loader.
Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,,
[PROV],Delete Host Group,,Normal end,
104 Audit log examples
Description
The pool ID of the created or expanded pool.
The pool type.
Snapshot or Thin Provisioning
Whether the multi-tier mode of the created or expanded pool is enabled or disabled.
0x80: Enable, 0x00: Disable
The warning threshold of the usage rate of the created or expanded pool. The unit is percent
(%).
The depletion threshold of the usage rate of the created or expanded pool. The unit is percent
(%).
The item does not output in the case of not specifying the depletion threshold.
The threshold of the usage rate of the created or expanded pool.
The unit is percent (%).
The rate of remaining capacity for created or expanded pool in percent (%).
The auto control mode of the created or expanded pool.
0x40: Auto, 0x00: Manual
The cycle of performance monitoring for the created or expanded pool.
1: every one hour, 2: every two hours, 4: every four hours, 8: every eight hours, 129: every
one day
The monitoring period of the pool. Format: "H1:M1-H2:M2" H1: The time when the monitoring
starts (hour) M1: The time when the monitoring starts (minute) H2: The time when the monitoring
ends (hour) M2: The time when the monitoring ends (minute).
The result of pool creation or expansion.
Normal end: Normal end, Error (xxxx-yyyy): Abnormal end, Not Execute: Not Executed
xxxx: Part code, yyyy: Error code
The number of the created or expanded pools.
The LDKC number, the CU number and the LDEV number of the pool volume assigned to the
created or expanded pool.
The result of the assigning the pool volume to the created or expanded pool.
Normal end: Normal end, Error (xxxx-yyyy): Abnormal end, Not Execute: Not Executed
xxxx: Part code, yyyy: Error code
The number of the created or expanded pool volume.