Local Settings (Replication); Configure Blackout Windows; Source Appliance Parameters - HP StorageWorks D2D - Backup Systems User Manual

Weekly calendar
Table 16 Source appliance parameters
Source Appliance tab No fields are editable.
Appliance Name
Appliance Address
Serial Number
Available
Capacity
Free Space
Firmware version

Local Settings (Replication)

This page allows you to view and configure replication ports and blackout windows. You can also
enable bandwidth limiting.

Configure blackout windows

This option allows you to specify times when replication should not occur, for example during planned
maintenance or heavy network traffic.
This section shows the hours on which the Target Appliance is available for
replication during the week. Any blackout windows that have been specified
will be reflected in this calendar.
This is the name of the Source Appliance.
This is the IP address of the Source Appliance.
This is the serial number of the Source Appliance.
This field indicates whether the Source Appliance is available.
This shows the capacity of the Source Appliance.
This shows the amount of free space on the Source Appliance.
This shows the firmware version of the Source Appliance.
D2D Backup System HP D2D4112 137