License (Settings); More About Replication Licensing; More About Capacity Upgrade Licensing - HP StorageWorks D2D - Backup Systems User Manual

License (Settings)

Licensing is used to enable optional product functionality, such as capacity upgrades and replication.
The Licenses page shows you a list of the features that are available for your product and whether
they have been enabled and licensed. Most features are only enabled when they are licensed. If you
have purchased a feature that requires a license, you will receive a license entitlement certificate with
your product. This is a paper document that contains all the information you need to obtain your
unique License to Use (LTU) key. If you have Internet access, you can obtain the key from the HP
Webware site by connecting to the web address specified on the certificate and following the
instructions on the web. (Users without Internet access may use the contact numbers provided with
the entitlement certificate.)
You will be required to enter the product's serial number when you request a License to Use key.

More about replication licensing

Replication is a licensed feature. Each HP D2D Backup System that will be used as a Target Appliance
must have a Replication license activated.

More about capacity upgrade licensing

The HP D2D (iSCSI and FC) is supplied with eleven hot-plug RAID disks and an online spare disk (in
bay 12). The Capacity Upgrade Kit provides an additional eleven hot-plug +1 online spare disks.
You cannot use the disks in the Capacity Upgrade Kit until they are licensed.
IMPORTANT:
When you add the Capacity Upgrade Kit, the HP D2D goes offline while the RAID is rebuilt.
D2D Backup System HP D2D4112 145