HP StorageWorks D2D - Backup Systems User Manual page 91

3. Decide how you will seed the first full backup on the Target Appliance. (See also
"Seeding the Replication Target
• If you are seeding across the WAN or have been able to colocate the Target Appliance on
the same LAN as the Source Appliance, go to step 4.
• If you are seeding using physical tape media:
1.
Use Tape Attach to copy the first full backup to physical media.
2. Transport the physical media to the replication target site.
3.
Create a Non-Replicating Library on the Target Appliance.
4. Import the physical media into a slot within the Non-Replicating Library on the Target
Appliance.
4. Go to the Mapping-Configuration page and select a Non-Replicating Library to be converted to
a Replication Source Library.
Appliance" on page 88.)
D2D Backup System HP D2D4112 91