Leds; Front Panel Leds; Hot-Plug Drive Leds; Front View Of The Hp D2D Backup System - HP StorageWorks D2D - Backup Systems User Manual

6 LEDs

In this chapter:
• "Front panel
• "Rear panel
• "Capacity upgrade kit
• "Fibre Channel card
• "Beacon

Front panel LEDs

Figure 32 Front view of the HP D2D Backup System
1. HP D2D Beacon LED
2. System Health LED
3. and 4. LAN port LEDS
5. Power On button/LED

Hot-plug drive LEDs

The status of hot-plug hard drives installed in the server is indicated by the drive activity LED indicator
located on the front panel of the server.
LEDs" on page 71
LEDs" on page 73
LEDs" on page 72
LEDs" on page 73
mode" on page 74
Steady blue: identifies the unit
nl
Amber: Power off or system hardware fault
Steady green: Hardware is performing correctly
nl
Flashing red: fault with the power supply, such as
power supply or fan failure
Flashing green: network connection
nl
Off: no network connection or network not configured
Steady green: Power connected, device ready to use
nl
Steady amber: Device switched off or in hibernation
with power connected
nl
Off: No power connected
D2D Backup System HP D2D4112 71