Connecting And Installing The Hp D2D Backup System; Installing The Rail Kit; Overview; Kit Contents - HP StorageWorks D2D - Backup Systems User Manual

2 Connecting and installing the HP D2D
Backup System
In this chapter:
• "Installing the rail
• "Connecting the
• "Supported network
• "Powering on the HP
• "Software installation, discovery and
• "Web browser

Installing the rail kit

Overview

This section contains instructions for installing HP rack rails into square and round hole racks for the
HP D2D (1U) and HP D2D (2U) Backup Systems.

Kit contents

• Two rack rails (left and right)
• Mounting hardware for square and round hole racks
• Two tie wraps
NOTE:
If mounting the HP D2D into threaded hole or telco racks, please see
to purchase mounting hardware.

Important safety information

See also the Safety Booklet on the HP StorageWorks D2D Backup System CD-ROM.
CAUTION:
Electrostatic discharge (ESD) can damage electronic components. Be sure you are properly grounded
(earthed) before beginning any installation procedure.
kit" on page 31
hardware" on page 35
configurations" on page 37
D2D" on page 39
configuration" on page 39
settings" on page 44
http://www.racksolutions.com
D2D Backup System HP D2D4112 31