Disk Raid Errors And Warnings; Network Warnings; System State; Storage Pool Messages - HP StorageWorks D2D - Backup Systems User Manual

Hp storageworks d2d backup system hp d2d4112 user guide (eh993-90919, june 2009)
Hide thumbs Also See for StorageWorks D2D - Backup Systems:
Table of Contents

Advertisement

You can configure email alerts, which will automatically send a message to your mail system when
a problem occurs (see
The Summary page of the Web Management Interface can indicate an error or warning message,
highlighted by an information, a warning or an error icon against major sub systems. See
"Status
icons" on page 110.
The System Event Log in the Web Management Interface can also highlight warnings or errors.
See
"Log
(Status)" on page 130.
TIP:
If you have selected a language other than English and find that some of the messages are in English,
you have upgraded the firmware without upgrading the language pack. This is easily remedied by
following the instructions in
to always upgrade the language pack at the same time as the firmware.

Disk RAID errors and warnings

See
"Hard disk

Network warnings

See
"Connecting to the

System state

This describes the overall state of the HP D2D.
RAM Failure Warning
Your HP D2D is designed to operate with 16 GB of RAM. If it is outside this limit, a warning will appear.
The device will still operate, but with very limited performance.
Check that the memory modules are correctly mounted in the slots
Check that you have the correct memory capacity inserted
Check that they are in the correct slots
CPU Faulty Warning
You HP D2D is designed to operate with a certain processor and speed. If it is outside this limit, a
warning will appear. The device will still operate, but with very limited performance.
Check that the processor is the correct version

Storage Pool messages

If you have installed the Capacity Upgrade Kit and it is powered off for any reason, you should also
power down the HP D2D Backup System. Then restart the Capacity Upgrade Kit before you restart
the HP D2D Backup System. If the two units are not powered on in the correct sequence, you will get
a message that "a storage pool is not available."
"Email Alerts
"Upgrading the language
replacement" on page 185 for details of hard disk drive failure and rebuild.
network" on page 179.
(Configuration)" on page 122).
pack" on page 143. Best practice, however, is
D2D Backup System HP D2D4112
181

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks d2d4112

Table of Contents