Local Library; Local Library Parameters - HP StorageWorks D2D - Backup Systems User Manual

Local library

This section contains a list of all available local libraries. Local Libraries are the libraries that have
been configured on this HP D2D.
Non-replicating library: a library on the HP D2D Backup System whose slots have not yet been
•
mapped for replication. Replication and Recovering Wizards are available only with non-replicating
libraries.
• Replication-Source library: a library on the HP D2D Backup System with cartridges that have been
mapped for replication. You do not have to map all cartridges in a Replication-Source Library and
the Replication-Target Library does not have to contain the same number of cartridges as the
Replication-Source Library.
• Replication-Target library: a library on the HP D2D Backup System with slots that hold cartridges
replicated from a Replication-Source library. The option is available to recover individual cartridges
from Replication-Target libraries.
Table 12 Local library parameters
Library Name
Role
Mapped Slots
Total Slots
Version
The name of the library, defined when the library device was created.
The role, which may be non-replicating, replication-source or replication-target.
All library devices are initially non-replicating, until slots have been configured
using this page.
The number of slots that have been mapped.
The total number of slots configured on the library device.
The version number of the library.
D2D Backup System HP D2D4112 133