Replacing The Disks; Storage-Shelves Showing Three Disk Failures - HP StorageWorks D2D - Backup Systems User Manual

Figure 69 Storage—Shelves showing three disk failures
IMPORTANT:
When you have two shelves, the disk failures may be on one shelf only and the RAID status of the
other shelf is shown as operational. However, you will lose all data on the HP D2D Backup System.

Replacing the disks

Power off and replace the disks, as described earlier in this chapter. When you power on again, the
disks are show as OK in the Storage-Shelves page, but the Shelf and Storage Pool both have an
invalid configuration.
192 Hard disk replacement