Attaching A Physical Tape Library Or Tape Drive (Optional); Hardware Requirements For Tape Attach; Supported Devices - HP StorageWorks D2D - Backup Systems User Manual

Hp storageworks d2d backup system hp d2d4112 user guide (eh993-90919, june 2009)
Hide thumbs Also See for StorageWorks D2D - Backup Systems:
Table of Contents

Advertisement

3 Attaching a physical tape library or tape
drive (optional)
In this chapter:
• "Hardware
• "Tape device installation
• "Removing the
• "Installing the
• "Replacing the
• "Connecting an external or rackmount tape

Hardware requirements for Tape Attach

A tape storage device may be attached directly to your HP D2D Backup System, allowing you to store
backups offsite.
To use this facility you need:
An HP StorageWorks Ultrium tape storage device, such as a tape library or tape drive. This should
be an external device or a 1U or 3U rackmount enclosure for internal devices. The appropriate
cables for the rackmount shelf must be used. Both SAS and SCSI half-height and full-height tape
storage devices are supported.
A host bus adapter, HBA, for the tape device connection (because there are no embedded SAS
or SCSI ports). You must purchase and install the HBA before connecting the tape storage device.
NOTE:
Physical tape storage devices attached to the HP D2D Backup System can only be accessed by the
HP D2D Backup System, using the Tape Attach pages. They do not appear as attached network
devices to the host system.

Supported devices

The following tape storage devices are supported:
HP 1x8 G2 Autoloader (1 drive, 8 slots, 1 mail slot)
HP MSL 2024 Tape Library (2 drives, 24 slots, 1 mail slot)
HP MSL 4048 Tape Library (4 drives, 48 slots, 1 mail slot)
Library-embedded or standalone HP StorageWorks Ultrium Tape Drives (LTO-2, LTO-3 and LTO-
4)
Please refer to
supported host bus adapters and tape storage devices. Please refer to
147 for more information about transferring data to the storage device.
requirements" on page 45
overview" on page 46
covers" on page 46
HBA" on page 47
cover" on page 51
http://www.hp.com/go/connect
device" on page 51
or
http://www.hp.com/go/ebs
"Using Tape
D2D Backup System HP D2D4112
for a list of all
Attach" on page
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks d2d4112

Table of Contents