Replication Source For Local Library Parameters; Slot Mapping For Local Library To Source Library Parameters - HP StorageWorks D2D - Backup Systems User Manual

Select a local library to display appropriate details or options in the other sections of this page.
Table 13 Replication source for local library parameters
Replication-Source library selected
Slot Mapping Name
Target Appliance Name
Target Appliance Address
Target Appliance Serial Number
Target Library Name
Status
Online
Replication-Target library selected
Slot Mapping Name
Source Appliance Name
Source Appliance Address
Source Appliance Serial Number
Source Library Name
Status
Online
Table 14 Slot mapping for local library to source library parameters
Only when a Replication-Target library is selected
Slot Mappings
Source Slot Name Cartridge Bar-
code
Target Slot Name
Target Slot Name Cartridge Barcode
134 The Web Management Interface
This is the slot mapping name. Is it created when you run the wizard
to define the grouping of slots that you select.
The name of the Target Appliance to which cartridges will be replicated.
The IP address of the Target Appliance to which cartridges will be
replicated.
The serial number of the Target Appliance to which cartridges will be
replicated.
The name of the library to which cartridges will be replicated on the
Target Appliance .
The status of the replication link for that library.
Whether the library is online.
This is the slot mapping name. Is it created when you run the wizard
to define the grouping of slots that you select.
The name of the Source Appliance from which cartridges will be rep-
licated.
The IP address of the Source Appliance from which cartridges will be
replicated.
The serial number of the Source Appliance from which cartridges will
be replicated.
The name of the library from which cartridges will be replicated on the
Source Appliance.
The status of the replication link for that library.
Whether the library is online.
These are the slot numbers in the Replication-Source library that have
been selected for replication.
These are any barcodes associated with those slots in the Replication-
Source library.
These are the mapped slot numbers in the Replication-Target library.
They usually have the name of the barcode or they may be Unmapped.
These are any barcodes associated with those slots in the Replication-
Target library. The wizard allocates barcodes automatically.