Library And Tape Tools - HP StorageWorks SDLT Series Reference Manual

Table 15: Troubleshooting Chart
If
The amber indicator is
on.
Fatal or nonfatal errors
occur for which a
cause cannot be
determined.
After taking the action listed in Table 15, power on the SDLT drive to rerun POST.

Library and Tape Tools

The HP Library and Tape Tool (LTT) is a tape management and diagnostic tool to
help you install and support your HP storage product. In addition to LTT's
diagnostic and troubleshooting ability, it offers useful information about your
products and provides automated firmware update checks from the Internet, with
the ability to retrieve the latest firmware versions.
Complete instructions and download of LTT are available at:
www.hp.com/support/tapetools
SDLT Tape Drives Reference Guide
Then
A drive fault has occurred.
The bus termination or
SCSI signal cable
connections might be
incorrect.
The AC main power
source grounding might
be incorrect.
Troubleshooting the SDLT Drive
Action
Try to unload the cartridge
and re-initialize the drive
by turning the drive power
off and then on again. The
green light will flash. If
re-initializing is successful,
the lights illuminate steadily
again and go off.
Ensure the SCSI bus is
correctly terminated.
(External drives only)
Plug the SDLT drive into a
grounded AC main power
outlet on the same line
powering the server.
33