Tm-T88Iv Basic Specification Table; Part Names And Basic Operation; Part Names - Epson TM-T88IV Technical Reference Manual

1.2.5 TM-T88IV Basic Specification Table

Table 1-1
1. High-speed print mode
2. High-speed power
consumption mode
3. Serial interface selectable
baud rates
4. Conditions for canceling
receive buffer BUSY state *
5. Supported character sets
(extended graphics)
6. Driver (EPSON OPOS ADK,
Advanced Printer Driver)
* For details on the conditions for canceling the receive buffer BUSY state, refer to "DIP Switch Functions" (page 2-3).

1.3 Part Names and Basic Operation

1.3.1 Part Names

* For details on DIP switch settings, refer to "DIP Switch Positions and Steps for Changing DIP Switch
Settings" (page 2-2).
Rev. A
TM-T88IV
Approx. 200 mm/s (7.9") maximum
Average : Approx. 1.8A
2400, 4800, 9600, 19200, 38400, 57600, 115200
Default Setting: 9600
Settable baud rate with DIP switches 1-7/1-8:
4800, 9600, 19200, 38400
Settable baud rate with commands:
2400, 4800, 9600, 19200, 38400, 57600,115200
Set with DIP SW2-5 *
11 pages including WPC 1252,
PC866 [Cyrillic #2], PC852 [Latin2])
• Some baud rates cannot be used in serial
communications (38400 bps).
Note: The driver cannot set a 38400 bps baud
rate.
Cutter cover
Power switch
Figure 1-1 Printer part names
TM-T88IV Technical Reference Guide
Printer cover
Control panel
Cover open button
Product Overview 1-3