Xerox DocuPrint N2025 System Administrator Manual page 241

5
3
2
1
6
7
8
Remove the access cover by (1) pulling it out at the
bottom, (2) lifting it up slightly, then (3) pulling it away at
the top.
Remove the two screws that secure the card to the
controller board. Set the screws aside to use later in this
procedure.
Remove the card by gently lifting it away from the
receptacle and pulling it away from the controller board.
Use the screws from Step 6 to attach the interface cover
plate that came with the printer.
Chapter 6: Installing Printer Options
Interface Card
6-49