5
Remove the two screws that secure the 500 sheet feeder to
the 2,000 sheet feeder (from inside the feeder).
6
Lift the 500 sheet feeder off of the 2,000 sheet feeder.
7
Replace the printer's paper tray, reconnect the power cord,
and power on the printer.
Check the Control Panel display. When the printer has
8
completed its power on diagnostics, the display should
show Ready. If an error message is displayed, refer to Table
5.1 on page 5-5 for instructions.
Chapter 6: Installing Printer Options
2,000 Sheet Feeder
6-23