Table 1.15 System Menu Functions (continued)
Menu Item and Function
Duplex
Enable or disable duplex printing for
PostScript and PCL jobs. The available
values are:
Off*
Long Edge
Short Edge
This item is only available when the
optional Duplex Module is installed.
For information on the use of Long
Edge and Short Edge printing, see the
section "Configuring Duplex Printing"
(page 1-122).
Control Panel settings for this
feature may be overridden by the
settings in the printer driver.
Keystrokes
1. Press Menu Up or Menu Down
until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Chapter 1: Configuring the Printer
Using the Menu System
Display
Menus
System Menu
System Menu
Duplex
Duplex
=
New Value
System Menu
Duplex
Ready
Table 1.15 Page 5 of 11
1-47