Xerox DocuPrint N2025 System Administrator Manual page 93

Table 1.23 Ethernet Menu Functions (continued)
Menu Item and Function
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
5 - 300 seconds (60*)
This item also causes an implicit job
end such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., formfeed, reset, etc.).
The time changes incrementally by 1
second each time either Value Up or
Value Down is pressed. Holding
down Value Up or Value Down
causes continuous scrolling through
the values.
Speed
Set the speed of the 10/100 Ethernet
interface (does not appear if the
10Base2 option is installed).
The available values are:
Auto*
10/HALF
10/FULL
100/HALF
100/FULL
HALF = Half duplex Ethernet mode
FULL = Full duplex Ethernet mode
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Chapter 1: Configuring the Printer
Using the Menu System
Display
Menus
Ethernet Menu
Ethernet Menu
Port Timeout
Port Timeout
New Value
Ethernet Menu
Port Timeout
Ready
Menus
Ethernet Menu
Ethernet Menu
Speed
Speed
New Value
Ethernet Menu
Speed
Ready
Table 1.23 Page 12 of 12
=
=
1-77