Xerox DocuPrint N2025 System Administrator Manual page 52

Using the Menu System
Table 1.13 PCL Menu Functions (continued)
Menu Item and Function
Point Size
Set the point size when the font
selected is a scaleable proportional
font. Point size is measured in parts
per 72 of an inch.
The available values are:
4.00 - 999.75 (12.00*)
The point size changes incrementally
by .25 each time either Value Up or
Value Down is pressed. Holding
down Value Up or Value Down
causes continuous scrolling through
the point sizes.
1-36 System Administrator Guide
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item Down
until you see:
3. Press Value Up or Value Down
until you see:
4. Press Enter. You will see:
5. Press Online. You will see:
Display Reads
Menus
PCL Menu
PCL Menu
Point Size
Point Size
New Value
PCL Menu
Point Size
Ready
Table 1.13 Page 2 of 6
=