Xerox DocuPrint N2025 System Administrator Manual page 226

Duplex Unit
6-34 System Administrator Guide
7 Close the rear cover.
8 Reconnect the printer's power cord and power on the
printer.
Check the Control Panel display. When the printer has
9
completed its power on diagnostics, the display should
show Ready. If an error message is displayed, refer to Table
5.1 on page 5-5 for instructions.
10 If you have no other options to install, print a
Configuration Sheet (see page 1-102) and check it to
confirm that the option(s) have been properly installed.