Xerox DocuPrint N2025 System Administrator Manual page 174

Maintenance Kit Instructions
4-12 System Administrator Guide
6 Insert the guide pins on the right side of the new fuser
into the guide holes of the printer.
7 Secure the fuser:
1
1
2
2
8 Close the rear cover.
9 To complete the installation procedure, refer to the
installation instructions in your maintenance kit. If you
have misplaced the maintenance kit instructions package,
contact Customer Support Center.
Reconnect the printer's power cord and power on the
10
printer.
11 Check the Control Panel display. When the printer has
completed its power on diagnostics, the display should
show Ready. If an error message is displayed, refer to Table
5.1 on page 5-5 for instructions.
Press down on the left side of the fuser.
Move the lever to its original position.