4
1
2
2
1
4
3
Remove the side cover by (1) pressing in, (2) sliding,
(3) pulling it out from the bottom and (4) down.
3
4
Place the two stubs of the duplex unit on the guides
located near the bottom of the printer.
5
Firmly push the duplex unit forward until the clips snap
into place.
6
Reinstall the side cover by (1) lining up the tab,
(2) pushing up, (3) while pushing in, and (4) sliding it
into place.
3
Chapter 6: Installing Printer Options
Duplex Unit
6-33