Kyocera TASKalfa 650c Management Manual page 34

1 SETTING ITEMS (USER)
Registering contacts from log lists
You can register information such as remote fax numbers and e-mail addresses in the address book from the send/receive
log screen.
The following information can be registered from the Send log:
Remote fax numbers that were dialed by direct entry using the digital keys, or that were searched for by the LDAP
server
E-mail addresses that were manually entered, or that were searched for by the LDAP server
The following information can be registered from the Receive log:
Remote fax numbers that were dialed by direct entry using the digital keys, or that were searched for by the LDAP
server for a polling reception
E-mail address of the sender
The following information can be registered from the Scan log:
E-mail addresses that were manually entered
Press [JOB STATUS] on the touch panel.
1
2 Press the [LOG] tab and press [SEND] (or [RECEIVE] or [SCAN]).
The SEND (or RECEIVE or SCAN) LOG list is displayed.
3 Select the job that includes the fax number or e-mail address you want to register into
the address book, and press [ENTRY].
To register e-mail addresses specified as Bcc contacts into the address book from the scan log, it is necessary
to enable the [Bcc Address Display] option from the COMMAND CENTER - Email menu. If the [Bcc Address
Display] option is disabled, the description [Bcc Address] is displayed instead of an e-mail address on the scan
log screen. In this case, even if you select the description [Bcc Address], [ENTRY] cannot be used. For
instructions on how to enable the [Bcc Address Display] option, refer to the COMMAND CENTER Guide.
32 Managing Address Book