Kyocera TASKalfa 650c Management Manual page 121

2.SETTING ITEMS (ADMIN)
Specify the following items as required and press [OK].
3
AUTOMATIC CHANGE OF PAPER SOURCE — Selecting [ON] for this function allows the equipment to feed the
same size of paper from a different drawer even if the specified drawer from which paper is being fed is empty.
This function is always enabled when copy operations are performed using Automatic Paper Selection (APS). To
learn more about APS, refer to the Copying Guide.
PAPER OF DIFFERENT DIRECTION — Selecting [ON] for this function allows the equipment to feed the same
size of paper that is set in a different direction if the drawer from which paper is being fed is empty.
Paper feeding when the drawer is out of paper during copying is as follows:
This is an example when the drawer for feeding paper is automatically changed while data is being copied on
A4-size paper.
AUTOMATIC CHANGE OF
PAPER SOURCE
ON
ON
OFF
OFF
SUSPEND PRINTING IF STAPLER EMPTY — When this is set to [ON], this equipment quit a job with stapling
when the stapler is empty. When this is set to [OFF], this equipment will continue the job without stapling.
DEFAULT MODE OF AUTO COLOR — Press the default color mode for auto color.
Options
PAPER OF DIFFERENT
DIRECTION
ON
OFF
ON
OFF
Paper Feeding
Using Automatic Paper
Selection (APS)
A4 and A4-R paper are fed.
A4 paper is fed.
A4 and A4-R paper are fed.
A4 paper is fed.
Setting Copy Functions
2 SETTING ITEMS (ADMIN)
Specifying the drawer
manually
A4 and A4-R paper are fed.
A4 paper is fed.
—
—
119