Kyocera TASKalfa 650c Management Manual page 144

2 SETTING ITEMS (ADMIN)
Setting PEAP
The CA certificate must be installed in this equipment before performing settings for IEEE 802.1X authentication.
For instructions on how to install the certificate, refer to the COMMAND CENTER Guide.
PEAP is not available for Windows Server 2008.
Select [PEAP] and press [Next].
1
The WIRED 802.1X SETTINGS (PEAP) screen is displayed.
2 Select [EAP-MSCHAPv2] for the inner authentication method and press [Next].
The WIRED 802.1X SETTINGS (EAP-MSCHAPv2) screen is displayed.
Specify the following items as required and press [Next].
3
[EAP-USER NAME] — Press this button to enter the EAP-User name.
[PASSWORD] — Press this button to enter the authentication password.
[RETYPE PASSWORD] — Press this button to re-enter the authentication password.
When you press the above buttons, the on-screen keyboard is displayed. Enter a value using the keyboard and
digital keys, and press [OK] to set the entry.
142 IEEE 802.1X Authentication Setting