Preface Thank you for purchasing the Multifunctional Digital Systems. The SAFETY INFORMATION describes the necessary precautions for using this Multifunctional Digital Systems. For your added safety, be sure to read this booklet before using this equipment. Trademarks Company names and product names in this manual are the trademarks of their respective companies. Preface...
Security Precautions In order to make correct use of this products security function, first read the following precautions carefully. For customers using this equipment Do not shut down the equipment while “ERASING DATA” is being displayed; the erasure of the data carried out until then may become invalid.
Notice to Users After a suitable place has been selected for the installation of the equipment, please do not change it. Avoid excessive heat, dust, vibration and direct sunlight. Also, provide proper ventilation as the copier emits a small amount of ozone. For U.S.A.
Page 8
For Canada only This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe A est conforme à la norme NMB-003 du Canada. Except U.S.A. and Canada The unit is classified as Class 1 Laser Product according to IEC 60825-1:1993/EN 60825-1.1994 including amendments. The unit uses laser diode of output 13.3 mW, wave length 788 nm, continuous pulse.
Quality is Second to None We recommend the use of our own brand supplies. We will not be liable for any damage caused by the use of third party supplies in this equipment. Quality is Second to None...
Page 10
Supplies / Parts Dependability Genuine supplies are subjected to the strictest of inspections so that every supply you receive will perform at optimal levels. High Productivity Genuine supplies are created to meet the demands of our competitive world and provide highspeed reliable copies when you need them.
CONTENTS Preface............................1 Security Precautions........................ 2 Notice to Users ......................... 3 Quality is Second to None ....................... 5 Chapter 1 GENERAL PRECAUTIONS General Precautions....................... 10 When installing or moving ....................10 When using the Multifunctional Digital Systems..............11 During maintenance or inspection ..................13 When handling supplies ......................
Page 13
GENERAL PRECAUTIONS This chapter describes the necessary safety precautions for using the equipment. General Precautions ......................10 When installing or moving ............................10 When using the Multifunctional Digital Systems....................11 During maintenance or inspection ........................13 When handling supplies ............................13...
1 GENERAL PRECAUTIONS General Precautions When installing or moving For U.S.A. and Canada This Multifunctional Digital Systems requires 115 V, 20 A (or 15 A + 20 A), 50/60 Hz electric power. For EU This Multifunctional Digital Systems requires 220 to 240 V AC, 13 A, 50/60 Hz electric power. Except U.S.A., Canada and EU This Multifunctional Digital Systems requires 220 to 240 V AC, 10 A, 50/60 Hz electric power.
1 GENERAL PRECAUTIONS 1.GENERAL PRECAUTIONS Do not install the equipment by yourself or try to move it once it has been installed. This could result in an injury or damage to the device. Contact your service representative if the equipment needs to be installed or moved. ...
Page 16
1 GENERAL PRECAUTIONS Be careful not to catch your fingers between the duplexing unit and its cover. This could injure you. Do not touch the metal portion of the bridge unit as it could burn you. Position of Certification label, etc. Identification label For U.S.A.
1 GENERAL PRECAUTIONS 1.GENERAL PRECAUTIONS Other points Be very careful to treat the touch panel gently and never hit it. Breaking the surface could cause malfunctions. Do not turn the power OFF with paper left jammed inside the equipment. This could cause a malfunction when the power is turned ON next time.
Page 18
1 GENERAL PRECAUTIONS General Precautions...
ENVIRONMENTAL INFORMATION This chapter gives the information regarding the environment. Environmental Information....................16 ENERGY STAR® Program...........................16...
2 ENVIRONMENTAL INFORMATION Environmental Information ® ENERGY STAR Program As a member of the ENERGY STAR Program, attaches the ENERGY STAR logo to all products which meet the ENERGY STAR Program requirements. The ENERGY STAR Program aims at the promotion of the development and wider usage of office equipment including energy-efficient computers in order to address environmental issues such as global warming.