Kyocera TASKalfa 650c Management Manual page 109

2.SETTING ITEMS (ADMIN)
Specify the following items as required and press [OK].
3
ENABLE HTTP SERVER — Press [ENABLE] to enable the HTTP network server service, or [DISABLE] to disable
the HTTP network server service. This option must be enabled for COMMAND CENTER and the e-Filing web
utility.
[PRIMARY PORT NUMBER] — Press this button to enter the primary port number to be used for HTTP access
from the other client. It is recommended that you use the default port number "80" if you are not sure about
changing this port number.
[SECONDARY PORT NUMBER] — Press this button to enter the secondary port number to be used to access
COMMAND CENTER and the e-Filing web utility. It is recommended that you use the default port number "8080" if
you are not sure about changing this port number.
ENABLE SSL — Press [ENABLE] to enable the SSL for accessing COMMAND CENTER and the e-Filing web
utility, or [DISABLE] to disable the SSL for accessing COMMAND CENTER and the e-Filing web utility. When this
option is enabled, the data transferred between the equipment and client computers will be encrypted using a
private key when operating COMMAND CENTER and the e-Filing web utility.
To enable SSL, you must create a self-signed certificate in the equipment or import a server certificate using
COMMAND CENTER. If the self-signed certificate is not created or the server certificate is not imported, SSL
cannot be enabled.
4 Continue to another network setting if required, then press [APPLY NOW].
The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network interface
card to apply the changes.
2 SETTING ITEMS (ADMIN)
Setting Network Functions 107