Setting Scan Functions - Kyocera TASKalfa 650c Management Manual

1 SETTING ITEMS (USER)

Setting Scan Functions

You can change the initial settings (defaults) for scan jobs.
Press [SCAN] in the USER menu.
1
The SCAN screen is displayed.
To display the USER menu, see the following page:
P.8 "Entering User Menu"
Specify the following items as you require and press
2
COLOR MODE — Press the desired mode button.
COMPRESS — Press the desired mode button that applies to scan jobs in gray scale, full color, or auto color
mode.
SINGLE/2-SIDE SCAN — Press the desired mode button.
[SINGLE] — Press this button to set single page scan mode as the default scan mode.
[BOOK] — Press this button to set book scan mode as the default scan mode. This enables scans of both
sides of originals in the same direction.
[TABLET] — Press this button to set tablet scan mode as the default scan mode. This enables scans of the
front page in the general direction, and scans of the back page rotated 180 degree.
ROTATION — Press the desired mode button.
20

Setting Scan Functions

.